Rise Drilling has 2 Drilling Rig Pushers & 2 Drilling Rig Drillers with over a combine 50-year experience in the Oil & Gas Industry. Our hands have drilled Hundreds of successful wells for major Operators in crucial, high pressure & tough drilling formation environments.
Drilling shallow 1,500’ wells to deep 12,000’ TD Oil & Gas wells all-across Texas from Normal 9ppg mud weights to High 12.5ppg mud weights & above with High well bore pressures.
Our Rig Pushers & Drillers have the experience of drilling with Lost Circulation & Minimal drilling fluid returns while drilling with high pressure.
Having the experience of Control Drill meaning slowing down ROP & lowering pump pressure on the well bore to reach Total Depth. Having the ability to get a wire line log to bottom safely while running production casing to bottom all while drilling a successful well for the Operator.
Our Pushers have the experience of drilling with a Rotating Head which helps drill the well bore to TD with lower mud weights or drilling underbalanced to prevent lost returns in fractures of formation of the well bore. This practice is commonly used in drilling Eagleford/Chalk & Buda Formations Horizontal wells.
ALL our Pushers & Drillers are BOP Certified (Blow Out Prevention) having the experience, capability & knowledge to shut the well In with the BOP’s before the well bore pressure causes damage to the hands or drilling rig.
Working with a Safe Drilling Rig & Experienced Drilling Hands is key for Success & Performance.
Our drilling rig will have the ability to drill a total depth of 8,000 ft. with 4.5 inches of tested drill pipe with maximum Well Bore Pressure & maximum Rate of Penetration (ROP).
We will be able to drill a larger hole size to set larger & deeper surface casing up to 300,000#.
With the capacity of handling Normal Well Bore Pressure of 9.5ppg-10ppg while drilling with earth pit circulating mud system.
The rig will also have the ability to convert to 11” – 5K PSI (Blow Out Prevention) BOP & Triplex Pumps with all High-Pressure Valves, hoses etc. to be able to drill with 12.5ppg – 13ppg Drilling Fluid Mud Weights & Mud Tank Circulating System w/ Mud Tank Shaker’s.
It will also be able to Rig Move & Rig Up in 12 hours or less & Spud in Well Bore the same day with min. moving loads/permits depending on how far of a rig move it will be while Maximizing Rig Performance & Moving Capabilities.
With Duplex Pump Pressure we will keep a gauged Well Bore with minimal wash out & minimal excess cement for Operators when cementing production casing, saving time & money.
With Triplex Pump Pressure & 11” – 5K PSI (BOP) we will be set up for High Pressure wells for Safe Working Environment for the Drilling Hands & the rig to minimize risk of potential blow out.
The rig comes with back-up Generators, Duplex & Triplex Pumps, 11”-3K/ 11” – 5K BOP’s & back up parts/valves/hoses for every component of the Drilling Rig to minimize down time & Maximizing Rig Performance saving time & money.
To see our current inventory click here.
